We have various surface treatment technology such as many kinds of plating, electropolishing, chemical polishing, thermal spraying, fluoro-resin coating and etc., and also have composite surface treatment technology which these coatings are combined.
These coatings are used for various rollers and mold.
In Nomura plating, the various rollers for paper, steel and film makers etc. and molds for steel makers are not only treated the surface, but can be designed, machined and assembled.
We supply high quality and high precision products using fully equipped various machining centers and processing machines.
We have been established several unique "surface treatment plants" based on the many actual results and software (know-how) concerning the surface treatment.
We carry out in good faith until we agree in the quality of the surface treatment required of a customer's product. (instruction of the legal procedure in the case of surface treatment factory construction , operation instruction, etc.)
•Ex
JFE Fukuyama Works |
Facility of hard chromium plating on rolling roller |
JFE Chiba Works |
Facility of hard chromium plating on rolling roller |
Mitsubishi heavy industries,LTD Komaki-kita-factory |
surface Treatment plant for the parts of air craft. |
Clyde Carruthers | Plating plant for continuous casting mold |
Koyoseiki Akeno factory: |
Full automatic buffing and chromium plating equipment for constraction machine part |
Using surface analyzing equipment we meet customer's various needs of investigation and test based on the technology and experience and know-how for surface treatment.
•The main contents of operating
•A list of measurement equipment
Electron probe micro analyzer (EPMA), X-ray photoelectron spectroscopy(XPS), Spectrophotometer, Atomic absorption spectroscopy, Tensile test machine, Dinamic ultra micro hardness tester, Equipment for salt spray test and CASS test, Capillary electrophoresis, Wear test machine (Made by our company), X-ray diffractometer, Rolling fatigue test machine
While challenging the possibility of science technology through development of various parts such as space development and ocean development ( H-II rocket, Shinkai 6500, linear motor car, and accelerator of KEK, development in new field of a surface treatment is also challenged based on development of new technology.
Company name | Nomura Plating Co., LTD. |
Head office location | 5-12-20 Himejima Nishiyodogawaku Osaka-shi Osaka TEL:+81-6-6471-0966 FAX:+81-6-6471-8299 |
Capital | 16,000,000 yen |
Foundation | 1916 |
Establishment | 1942 |
Representative Representative director president | Shuhei Nomura |
Employee | 328 persons |
Osaka factory | 5-12-20 Himejima Nishiyodogawaku Osaka-shi Osaka TEL:+81-6-6473-1355 FAX:+81-6-6473-1308 |
Fukuyama factory | 3-3-19 Yanaizu-cho Fukuyama-shi Hiroshima TEL +81-84-934-1201 FAX +81-84-934-4268 |
Kanuma factory | Kanumakougyoudanchi 5 Satsuki-cho Kanuma-shi Tochigi |
JFE work shop | Hiroshima prefecture Fukuyama city Kokan-cho-1 JFE |
1916 | In 2-3, Sakaigawa, Minato-ku, Osaka-shi, an enterprise was inaugurated as a Nomura Mekki Koujou. |
1934 | The head office was relocated to 3-3-16, Utajima, Nishiyodogawa-ku, Osaka-shi. |
1942 | Hanshin Mekki Kougyou which is the past of Nomura Plating was founded |
1950 | A trade name change was made at Nomura Plating. |
1952 | The Himejima factory was newly established in 5-12-20, Himeshima, Nishiyodogawa-ku, Osaka-shi. |
1969 | The Fukuyama factory was established. |
1972 | The Kanuma factory was established |
1979 | The plating facility for continuous casting mold was constructed in Fukuyama factory. |
1986 | New work place was installed in NKK Fukuyama works. |
1987 | 1987 The fluoro-resin coating equipment for a large-sized roll was
worked at the Kanuma factory. Thermal spraying equipment was worked at Fukuyama factory. |
1991 | Fukuyama factory was extended. |
1995 | The head office is relocated to the present location. |
1996 | Head office building completion |
1999 | The Kanuma factor was extended |